Usted esta aquí: Video Profesional > Micrófonos > Inalámbricos > Especificaciones de Inalámbrico Sennheiser ew D1-ME 2

« Volver a Inalámbricos Sennheiser

Especificaciones de Inalámbrico Sennheiser ew D1-ME 2

MFR # EW D1-ME2

0 Estrellas de Evaluación

Frequency Response
20 to 20,000 Hz
Dynamic Range
> 135 dB (A)
Total Harmonic Distortion (THD)
Typ. < 0.1 %
Audio Sampling
24-bit / 48 kHz
Signal-to-Noise Ratio
? 105 dB (A)
RF Frequency Range
2,400 to 2,483.5 MHz
Modulation
GFSK with back channel
Transmission Method
TDMA, time diversity, frequency diversity, fast switching antenna diversity
Latency
3.9 ms
Audio Codec
APT-X Live
Operating Temperature
14 to 131°F (-10 to +55°C)
Storage Temperature
-4 to 158°F (-20 to +70°C) (The temperature range is influenced by the battery characteristics)
Latency
Multi-frequency targets
RF Sensitivity
<- 90 dBm
Audio Output
Mic/line level switch -24 dB/0 dB, XLR, balanced max +18 dBu, jack, unbalanced/balanced max +12 dBu/max +18 dBu
Low-Cut Filter
-3 dB at 120 Hz
Equalizer
7-band graphic equalizer
Automatic Gain Control
Compression/expansion with automatic make-up gain function
Display
OLED
Connection
XLR / 1/4" (6.3 mm) jack
Antenna Connector
2 x Rev-SMA
Network
RJ45
Network Protocol
Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6
Power Supply
12 VDC hollow jack
Current Consumption
350 mA
Weight
1.82 lb (824 g)
RF Output Power
Adaptive, up to 100 mW (country-specific)
Connection
3.5 mm jack socket, lockable
Microphone
Frequency Response: 50 to 20,000 Hz 
Max. Input Level: 2.2 V RMS
Line
Frequency Response: 20 to 20,000 Hz
Max. Input Level: 3.3 V RMS
Input Impedance
1 MOhm
Input Sensitivity
Automatic sensitivity adjustment
Battery
2 x AA size battery (1.5 V) 
Operating Time: typical 6 hours
Optional Accessories
Accupack: Operating Time: typical 11 hours
Weight
3 oz (85 g)
Microphone
Pre-polarized condenser
Sensitivity
20 mV/Pa
Polar Pattern
Omnidirectional
Max SPL Level
130 dB SPL

 

« Volver a Inalámbricos Sennheiser

img